Switching the ’on-screen display’ (OSD) onor off
Youcan switch the on-screen display of the current operating
informationon or off.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the P=or
;Pbuttonand confirm with the Pbutton.
MAIN MENU
SPECIAL SETTINGS
TV SYSTEM AUTO
CHILD LOCK OFF
OSD MODE AUTO.
16:9 WIDE SCREEN OFF
VCR 1 OR 2 VCR 1
REPEAT PLAY OFF
AUTO STANDBY ON
DEMO OFF
________________________________
TO EXIT
PRESS MENU
dSelectthe line ’OSD MODE’ with the P=or ;P
button.
eSelectone of the options indicated with the Por Q
button.
’AUTO.’:OSD information appears for a few seconds
eachtime an operating mode is selected and then
disappears.
’OFF’:OSD information is switched off.
’ON’:OSD information is switched on.
fConfirmwith the OK button.
gToend, press the MENU button.
DWiththe OK button you can superimpose the
on-screendisplay of current operating mode on the
TVscreen.
Switching to 16:9 wide screen picture
Ifyou are using a cassettewith 16:9 wide screen recordings,
youcan switch this function ’ON’. The TV set will now
automaticallyswitch to wide screen. This only works if you
haveconnected the TV set and the video recorder with a scart
cableand if your TV set is suitable for wide screen.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’SPECIAL SETTINGS’ with the P=or
;Pbuttonand confirm with the Pbutton.
dIfyou have a TV set in wide-screen format, select ’ON’in
line’16:9 WIDE SCREEN’. If not, select ’OFF’.
eConfirmwith the OK button.
fToend, press the MENU button.
28