![](/images/new-backgrounds/1285846/28584663x1.webp)
32Rerecording (Tape Duplication)
1.Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2
VCR 1
Playing VCR
|
| VCR 2 - Recording VCR |
|
|
| ANT |
|
| ANT |
| IN |
|
| IN |
AUDIO |
|
| AUDIO |
|
OUT IN | OUT |
| OUT IN | OUT |
|
|
| ||
VIDEO | CH3 CH4 |
| VIDEO | CH3 CH4 |
|
|
| ||
|
|
|
| 3. RF coaxial cable |
|
|
|
| from the OUT jack |
|
| 2. Video cable from VIDEO OUT Jack |
| of VCR 2 to the TV’s |
|
|
| ANTENNA IN Jack | |
|
| of VCR 1 to VIDEO IN Jack of VCR 2 |
| |
|
|
|
|
●Audio and Video cables are not supplied.
1
Make the connections shown above.
2
VCR 1 will play your tape. Put a prerecorded tape in VCR 1.
3
VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)
4
Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote control at VCR 2. Press the VCR but- ton, then press Number buttons 0, 0 to select Line Input. A/V IN will appear
6
Press the SPEED button to select SP or SLP at VCR 2.
7
Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.
Helpful Hints
•Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
•If a program has copy guard pro- tection, it may not record clearly.
•These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.