Philips VRA211AT owner manual Checking or Cancelling Timer Recordings

Timer Recording (cont’d) 31

Checking or Cancelling Timer Recordings

1
With the VCR on and in VCR position (the VCR light will appear	1
on the display panel), press the VCR button, then press the
MENU button.
2
Press the PLAY/o button or the STOP/p button to select
PROGRAM, then press the F.FWD/B button.

2-3

POWER	VCR/TV	EJECT
VCR	TV

	PLAY
REW		F.FWD
	STOP
MENU	STATUS/EXIT	CLEAR

4

5

3

Press the PLAY/o button or the STOP/p button to select

1 2 3

4 5 6

7 8 9

CH

PROGRAM REVIEW, then press the F.FWD/B button.

The timer recording information for the program in the lowest

numbered slot will appear on-screen. If no timer recordings are

set, nothing will happen when you press the F.FWD/B button.

ALT. CH

0VOL

SPEEDPAUSE/STILL

REC/OTR MEMORY MUTE

4

Press the F.FWD/B button repeatedly to review all pro- grammed timer recordings. If you don’t press the F.FWD/B button within 10 seconds, the VCR will automatically display infor- mation about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.

5

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

6

Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording.

Helpful Hints

•CLASH may flash on-screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer record- ing overlap. The current timer recording will not take place. You may choose to cancel the overlapping timer recording.

•To stop a started timer recording, press the STOP/EJECT button on the VCR.

•If the power fails for more than one minute, programmed timer recordings will be lost. If this occurs, repeat the steps on pages 11 and 15 before reset- ting the timer recordings.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and turn off the VCR immediately. The timer recording will take place if you turn off the VCR before the timer recording’s scheduled

start time.

See page 38 for more hints.