Recording 25
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
POWER | VCR/TV | EJECT |
3
Press the VCR button.
4
If the VCR light appears on the display panel, go to step 5. If the
3
VCR
REW
MENU
F.FWD
CLEAR
9
VCR light does not appear, press the VCR/TV button once.
5
6
1 2
4 5
7 8
3
6
9
CH
Press the SPEED button until the desired tape speed appears briefly
30.)
6
Use the CH(annel) o/p button or the Number buttons to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear.
5
7
0
SPEED
REC/OTR MEMORY
ALT. CH
VOL
PAUSE/STILL
MUTE
8
8
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
9
To stop recording, press the STOP/p button.
Helpful Hints
•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.
•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash
•Other recording options are on pages 26 - 32.
•You can change the tape speed during a recording, but some distor- tion will appear on the tape.
•The VCR will record in a preset vol- ume.
