Philips VRZ255 owner manual Hi-Fi Stereo Tape Playback

Hi-Fi Stereo Tape Playback 45

If a tape is recorded in Hi-Fi stereo, follow the steps below to play the tape in Hi-Fi stereo.

1		1
Press the VCR button, then press the MENU button.
SELECT , 9	CHOOSE :/OK		TV			VCR
A VCR SET UP			CBL/DBS	–	+	POWER	5
TUNER SET UP
INITIAL SET UP			MENU STILL/SLOW			cEJECT
		4
					PLAY
			EXIT/STATUS REW			FF /OK
					:
TO END PUSH EXIT				;;		::
					L
			TIMER [REC/OTR		STOP	S.SEARCH
2		2-3	1	2	3
			+	+
			START	STOP	DATE	CH
			4	5	6
Press the PLAY 8 or STOP 9 button to select VCR SET			–	–
UP, then press the FF :/OK button.			DBS	DAILY	WEEKLY
			7	8	9
SELECT , 9	CHOOSE :/OK					VOL
			SPEED	0	CLEAR

A ON SCREEN MODE	ON	QUICK PROGRAMMING
TIMER REC SPEED	MANUAL	VCR/TV 7;;INDEX ::7 AUDIO/MUTE
VIDEO STABILIZER	OFF
PICTURE	NORMAL
AUDIO OUT	HIFI
STEREO/SAP	STEREO

TO END PUSH EXIT

3

Press the PLAY 8 or STOP 9 button to select AUDIO

OUT, then press the FF :/OK button to select HIFI.

4

Press the EXIT/STATUS button.

5

Press the PLAY 8 button to start tape playback.

Helpful Hints

• During playback, Hi-Fi stereo may temporarily revert to normal audio when you adjust tracking. This is normal.

• If Hi-Fi stereo continually reverts to normal audio during playback, you may want to press the FF :/OK button to select MONO at step 3.

• Only tapes recorded in Hi-Fi stereo will play in Hi-Fi stereo. Tapes recorded in normal audio will play in normal audio.

• You may also select HIFI or MONO by repeatedly pressing the AUDIO/MUTE button on the remote control.