44 Multi-Channel Television Sound System (cont’d)
To receive and record programs broadcast in second audio, follow steps 1 - 6. To receive and record a program broadcast in stereo, make one of the connections shown, then follow steps 1 - 6.
If you have a Stereo and a Monitor TV, use a video cable to connect the VCR’s VIDEO OUT Jack to the TV’s VIDEO IN Jack. Use audio cables to connect the VCR’s AUDIO OUT Jacks to the Stereo’s AUDIO IN Jacks.
IN OUT ANT.IN
R 
AUDIO
L
RF OUT
VIDEO
CH3 CH4
IN OUT
R 
AUDIO
L
VIDEO 
CH3 CH4
ANT.IN
RF OUT
OR, if you have a
1
Press the VCR button, then press the MENU button.
SELECT , 9 CHOOSE :/OK
AVCR SET UP TUNER SET UP INITIAL SET UP
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the FF :/OK button.
SELECT , 9 CHOOSE :/OK
A ON SCREEN MODE | ON |
TIMER REC SPEED | MANUAL |
VIDEO STABILIZER | OFF |
PICTURE | NORMAL |
AUDIO OUT | HIFI |
STEREO/SAP | STEREO |
TO END PUSH EXIT |
|
3 |
|
Press the PLAY 8 or STOP 9 button to select STEREO/SAP, then press the FF :/OK button to set it to
SAP (for a Second Audio Program) or STEREO, whichev- er you prefer.
4
Press the EXIT/STATUS button.
5
Use the CH(annel) 8/9 buttons to select a channel to record.
6
Press the REC(ord)/OTR button to start recording.
Helpful Hints
•If you want to connect the VCR to a Stereo TV, follow these steps.
1)Connect the antenna or cable signal to the VCR’s ANT(enna) IN Jack.
2)Use stereo audio cables to con- nect the VCR’s AUDIO OUT Jacks to the TV’s AUDIO IN Jacks.
3)Use a video cable to connect the VCR’s VIDEO OUT Jack to the TV’s VIDEO IN Jack.
•Make sure the TV and the Stereo (if applicable) are in Line Input or Auxiliary mode. Please refer to your TV or Stereo owner’s manual for details.
