Philips VRZ255 Turning on Your VCR, Press the FF /OK button. The menu shown below will appear

10 Turning on Your VCR

Before turning on your VCR, make sure there are batteries in the remote control and the VCR, TV, and Cable Box/DBS (if applica- ble) are connected.

1

Press the VCR button, then press the POWER button.

2

Turn on the TV. Set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to. The menu shown below will appear.

SELECT , 9

AENGLISH ESPAÑOL FRANÇAIS

MAKE SELECTION OR

PUSH :/OK TO CONTINUE

3

Press the PLAY 8 or STOP 9 button to select the on- screen display language.

4

Press the FF :/OK button. The menu shown below will appear.

CONNECT ANTENNA OR CABLE

TO VCR

THEN PUSH :/OK KEY

OR . . .

FOR PLAY ONLY – PUSH STOP

5

Press the FF :/OK button to begin automatic channel setup. AUTO CH. SET PROCEEDING PLEASE WAIT will appear on-screen. The VCR will memorize all of the channels you receive, so when you scan through channels using the CH(annel) 8/9 buttons, you’ll only scan through channels that you receive.

6

When channels are set up, AUTO CH. SET COMPLETED will appear on-screen briefly.

2 Turn on the TV.

6 Wait for the VCR to set up channels.

	TV			VCR	1
	CBL/DBS	–	+	POWER
	MENU STILL/SLOW			cEJECT	4
	EXIT/STATUS	REW	PLAY	FF /OK
			:
		;;		::
3			L
	TIMER [REC/OTR		STOP	S.SEARCH
	1	2	3		5
	+	+
	START	STOP	DATE	CH
	4 –	5 –	6
	DBS	DAILY	WEEKLY
	7	8	9
				VOL
	SPEED	0	CLEAR
	QUICK PROGRAMMING
	VCR/TV	7;;INDEX ::7		AUDIO/MUTE

Helpful Hints

•Auto may appear on the display panel until the clock is set. After you connect the antenna/cable sig- nal to the VCR and connect the VCR to a power source, the clock may set itself automatically. The current time may appear on the VCR display panel.

•If you do not want to set up chan- nels now, press the STOP 9 button at step 5. TUNER NOT SET will appear on-screen briefly.

•You may not set up channels at step 5 if you are using a Cable Box/DBS.