Philips VRZ255 owner manual Setting the Remote Control to Operate a TV, Find the code for your TV

26 Setting the Remote Control to Operate a TV

Your VCR remote control may operate your TV. Follow these steps to set the remote control code.

1

Point the remote control at your TV. Press the TV but- ton, then press the POWER button. If your TV turns on or off, try the CH(annel) 8/9 buttons. If your remote control oper- ates the TV, you’re finished. If your TV doesn’t turn on or off, or if the CH(annel) 8/9 buttons don’t work, go to step 2.

2

Find the brand of your TV on the list below, and remem- ber the two-digit number beside it.

TV CODES

EMERSON	. . . . . . .14	RCA	. . .10
GOLDSTAR	. . . . . . .04	SAMSUNG	. . .18
HITACHI	. . . . . . .12	SANYO	. . .11
JVC	. . . . . . .05	SHARP	. . .16
MAGNAVOX . . . .	.01, 02, 03	SONY	. . .09
MITSUBISHI	. . . . . . .13	TOSHIBA	. . .08
PANASONIC . . . .	. . . .07, 17	ZENITH	06, 15
PHILIPS	. . . . . . .01

PHILIPS MAGNAVOX . . . . . .

. . . . . . . . . . . . . . . .01, 02, 03

2 Find the code for your TV.

1	TV			VCR
	CBL/DBS	–	+	POWER
	MENU STILL/SLOW			cEJECT
	EXIT/STATUS	REW	PLAY	FF /OK
			:
		;;		::
			L
	TIMER [REC/OTR		STOP	S.SEARCH
	1	2	3
	+	+			3
	START	STOP	DATE	CH
	4	5	6
	–	–
	DBS	DAILY	WEEKLY
	7	8	9
		0		VOL
	SPEED		CLEAR

QUICK PROGRAMMING

VCR/TV 7;;INDEX ::7 AUDIO/MUTE

3

While you press and hold the TV button, use two Number buttons to enter the two-digit code for your TV. For example, if you have a Zenith TV, press Number buttons 1, 5. Then, still holding the TV button, press the STOP 9 but- ton.

4

Repeat step 1.

If the remote control works your TV, you’re finished. If the remote control still doesn’t work your TV, repeat steps 2 - 3, using a different code for your brand.

Helpful Hints

• If you had to program the remote control to operate your TV, whenev- er you replace the batteries in the remote control, you will have to pro- gram the remote control again.

• There is no guarantee that the remote control will work your TV.