Getting the iPronto Up and Running

Wireless Network Settings

After setting the general settings, you need to set the wireless network settings. This is needed so your iPronto can connect to your home network and to the Internet, and to communicate with iProntoEdit. The Wireless Access Point (WAP) sends out RF (radio frequency) signals to the iPronto’s Wireless LAN Adapter. The iPronto must use the same wireless settings as the WAP.

How to set up your WAP on the iPronto, depends on the configuration you have in your home:

Your iPronto is connected to a network with a PC: You can read and modify information about your WAP settings on your PC.

Your iPronto is connected to a network without a PC: You can read information about the WAP settings in your WAP manual.

Wireless tab of the System Settings

21

Page 21
Image 21
Philips Wireless Equipment Box manual Wireless Network Settings