English
-Do not let water hotter than 50°C run through the water purifier, this may cause damage.
-Do not let the water purifier freeze.
Before daily use
-To prevent quick clogging of the filter cartridge, let the water run at the unfiltered setting for around 5 seconds before every use.
-If the water is highly coloured or turbid due to work on your water network, do not let the water run at the filtered setting until the water is clear.
-Cautions:
1Let the water run at the filtered setting for 10 seconds before use
each day.
2Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
3If you have not used the water purifier for more than two weeks, let the water run at the filtered setting for
Applications
-Only use the water purifier to filter water that meets drinking water standards.
-Do not block the filtered water outlet or connect other devices to it.
-If the water pressure is very high, reduce the water flow of the tap to prevent damage to the cartridge.
-Keep the water purifier away from heat to avoid distortion or breakage.
-Do not tamper with the water purifier.
-Do not remove the filter cartridge while you use the water purifier
-Do not use the water purifier without a filter cartridge.
-Do not place the water purifier near a window where it is exposed to direct sunlight.
-This water purifier does not soften water.
-Do not use filtered water in aquariums.Tap water, filtered or unfiltered, can be harmful to fish.
