Philips WP3811 Cartridge replacement indicator, How to replace the filter cartridge, Environment

Models: WP3810

1 32
Download 32 pages 55.26 Kb
Page 13
Image 13
Cartridge replacement indicator

English 13

-The tap water is contaminated due to plumbing activities or cleaning of the water tank.

-When you use cloudy water immediately after heavy rain.

Cartridge replacement indicator

Tip: Remove the cover of the filter cartridge and stick the cartridge replacement indicator to the inside of the cover. Check the colour of the hollow fibre of the filter cartridge through the cartridge window from time to time. If the colour of the filter matches the rust brown or dark grey shown on the cartridge replacement indicator, replace the filter cartridge (Fig. 27).

To help you determine when to replace the filter cartridge, the water purifier and each replacement filter cartridge comes with a self-adhesive

colour-coded cartridge replacement indicator. Place this replacement indicator in a convenient place for future reference.

How to replace the filter cartridge

1Close the tap and set the water selection lever to the unfiltered stream position. (Fig. 22)

2Tilt the used filter cartridge 90° backwards and pull it off the water purifier housing (Fig. 23).

3Write down the replacement date on the information label of the new cartridge.

4Tilt the new filter cartridge 90° backwards and insert it into the water purifier housing.

5Pull the cartridge upwards until it is in upright position. (Fig. 24)

Environment

-Do not throw away the water purifier with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 28).

Page 13
Image 13
Philips WP3811, WP3810 manual Cartridge replacement indicator, How to replace the filter cartridge, Environment, English