32
REMOTE USE WITH ACCESSORY DEVICES - DIRECT METHOD
VOL
1
2
Your remote control is set to work
your TV and many infrared remote
(IR) control VCRs, Cable Boxes,
Satellite Systems, DBS, DVD, etc.
However, an easy onetime step may be
necessary before the remote will work
your VCR.
Try this initial Direct Access Method to
see if going on to the following section
is necessary.
Place the TV/VCR/ACC Mode
Switch in the proper position.
Point the remote control at the
device and press the POWER button.
Does the remote turn the device ON?
If YES, stop and try other function but-
tons on the remote. If they also work
the device, then the remote is ready and
no further steps are needed.
If NO, continue...
Cable Converter
Satellite Receiver
VCR
First look up a THREE-DIGIT
remote control number for your brand
of Device before going through the sim-
ple steps on the following page.
Find your Three-Digit Code on pages
35-37.
Remember, if more than one
number is listed, you may have to
try more than the first Three-Digit code
given in order to locate your Device’s
remote code.
SMART HELP