Phone Labs Technology Company Phone Labs Dock-N-Talk manual Nextel Phones

UNIVERSAL DOCKING STATION USER’S GUIDE

Nextel Phones

Phone Labs’ Flash-To-Talk™ feature allows the Nextel Push-To-Talk™ service to be used from any regular corded or cordless telephone through the Dock-N-Talk™. On an iDEN cell phone, the Push-To-Talk™ (PTT) feature is activated by use of a special button. When using the Dock-N-Talk™, the FLASH button on your regular corded or cordless telephone activates the PTT functionality. The main difference is that, unlike the PTT button, you do not hold down the FLASH button while you are speaking. You need to press FLASH when you begin speaking, and press FLASH again when you finish.

To place a PTT call using your regular corded or cordless telephone, go off-hook by either picking up the receiver or by activating the speakerphone. Once you hear the dial-tone, dial the iDEN number of the individual or group you are calling and then press the FLASH button or use your hookswitch to effect a flash. Once you hear

a response, you’ll need to press FLASH to begin speaking, and again when you finish speaking. Throughout the conversation, each time you begin speaking, press FLASH. Each time you finish speaking, press FLASH again.

When you receive a PTT call using your regular corded or cordless telephone, you will hear your telephone ring with a distinctive ringing pattern. Pick up the handset as you normally would. If the other party is not speaking, you may immediately begin speaking. If the PTT caller is speaking, when they finish speaking press FLASH, answer and press FLASH again when you are finished speaking. Throughout the conversation, each time you begin speaking, press FLASH. Each time you finish speaking, press FLASH again.

18