Phone Labs Technology Company Phone Labs Dock-N-Talk manual Bluetooth Pairing Key

UNIVERSAL DOCKING STATION USER’S GUIDE

The following describes the two different test modes:

(1)Short Ring: Pressing down the key for less than one second will cause a short ring burst to extension sets.

(2)Long Ring: Pressing and holding down the key for at least one second then releasing it will provide two long rings to the extensions sets. The long ring is useful to confirm which telephones are connected to the Dock-N-Talk™. The software version information is sent via Caller ID to extension telephones between rings.

Bluetooth Pairing Key

Bluetooth devices must be paired before they can communicate. Normally, pairing needs to only be performed once. By pressing the Bluetooth Pairing key for at least two seconds, the Dock-N-Talk™ will enter into a search mode where it is expecting to receive communication from a bluetooth enabled cellular handset. After the Dock-N-Talk™ Bluetooth pairing key is pressed, the green LED starts to flash rapidly indicating it is in SEARCH Mode. The user must then initiate bluetooth pairing from the cell phone. The cell phone will prompt the user to enter a password or pass key. The default password is 3774. Once the Dock-N-Talk™ and cell phone establish a Bluetooth connection, the LED turns solid green to indicate connection to the

cell phone. Bluetooth operation requires the Phone Labs Bluetooth Module for functionality. The Bluetooth Module has a similar function to the cable and plugs into the same connector slot on the Dock-N-Talk™.

12