Pioneer AVH-P6400 Connect the back-up camera to the VIDEO input, Connecting the Units

Connecting the Units

Connecting the power cord (2)

When using this product with a back-up camera, automatic switching to VIDEO video when the gear shift is moved to the REVERSE (R) position is possible.

Connect the back-up camera to the VIDEO input.

This product

Power cable

Note:

• When you have completed lead wire connection, perform VIDEO SETTING correctly while referring to the Operation Manual.

• It is necessary to set to [BACK UP CAMERA] in the [VIDEO SETTING] when connecting the back-up camera.

Fuse resistor

Violet / white

Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE

(R)position. This connection enables the unit to sense whether the car is moving forwards or backwards.

Light green

Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.

Parking brake switch

Power supply side

Ground side

Note:

•The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.

Connecting method

Clamp the parking	Clamp firmly with
brake switch power	needle-nosed
supply side lead.	pliers.

5 Fig. 3