Section
03
Connecting the System
When connecting a rear view camera
When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). Rear- View mode also allows you to check what is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION
Rear view camera (e.g.
Violet/white
Power cord
To video output
RCA cable
Brown
(REAR VIEW CAMERA IN)
20 cm 
RCA connector 
!The screen image may appear reversed.
!The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes.
!The object in rear view may appear closer or more distant than in reality.
!Please note that the edges of the rear view camera images may differ slightly according to whether full screen images are displayed when backing, and whether the images are used for checking the rear when the vehicle is moving forward.
CAUTION
Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this navigation sys- tem.
5 m |
|
(16 ft. 5 in.) | The navigation unit |
|
Extension lead (for reverse signal)
Fuse resistor
For more details about the wiring, refer to Connecting
the power cord (2) on page 12
Notes
!It is necessary to set [Back Camera] in
[System Settings] to [On] when connect- ing the rear view camera. (For details, refer to “Operation Manual”.)
!Connect to the rear view camera. Do not connect to any other equipment.
16
En
