4.Select “Frequency”, “EQ Level” or “Q Factor” by moving the joystick up/down.
Selected option is highlighted in green.
5.Adjust the selected option by moving the joy-
stick left/right.
The selectable options are adjustable in the following limits:
Option | Adjustable Range |
Frequency | 100 Hz – 8 kHz |
|
|
EQ Level | |
|
|
Q Factor | WIDE/NARROW |
|
|
Note:
•The Front Left and Right speakers cannot be adjusted differently. The same is true for the Rear Left and Right. When you make adjustment to either of the pair, the other is automatical- ly set to the same position.
6.Select “Band” by moving the joystick up.
7.Repeat steps 3 – 6 for the selected band.
8.Complete the setting by clicking the joystick.
9.Repeat steps 1 – 8 for other speakers.
Adjusting the Speakers’ Output Level
You can readjust the speakers’ output levels once adjusted using a test tone while hearing music this time.
1. Select a speaker by moving the joystick.
The currently selected speaker is highlighted in green.
2.Click the joystick.
You are ready to make adjustments to the selected speaker. “Band” is highlighted in green.
Continued overleaf.
Fine Adjusting Audio (Expert)
62
