Pioneer AVM-P9000 Select “Scan” by moving the joystick, Scan Play, ITS Play, Click the joystick

Scan Play

In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds.

1. Select “Scan” by moving the joystick.

“Scan” is highlighted in green.

2. Switch the Scan Play ON by clicking the joy-

	stick.
	After selecting the desired repeat play range from those
	referred to in “Repeat Play” on page 35, switch Multi-
	CD Player Scan Play ON.
			Source plate
3. When you find the desired track (or disc), can-
	cel the Scan Play by clicking the joystick.
	If the Function Menu has been canceled automatically,			Scan Play range
	select the “Scan” in the Function Menu again.
	Display	Play range
	DISC SCAN	Disc Repeat
	MULTI SCAN	Multi-CD player Repeat

Note:

•Scan Play is canceled automatically after all the tracks or discs have been scanned.

•One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.

ITS Play

ITS Play plays the memorized track. (Refer to “ITS Programming (ITS)” on page 41.) ITS play of tracks is performed within the play range explained in the “Repeat Play” section.

1.Select “ITS” by moving the joystick.

“ITS” is highlighted in green.

2.Click the joystick.

Each click toggles ITS play On/Off.

After selecting the desired repeat play range from those referred to in “Repeat Play” on page 35, switch ITS Play ON.

Source plate

Note:

• If no track in the current range is programmed for ITS Play,

“Empty” is displayed. ITS Play

Multi-CD Player

Continued overleaf. 36