•To ensure proper heat dissipation of this prod- uct, take special care not to block the cooling fan side of this product.
•Cords for this product and those for other products may be different colors even if they have the same function. When con- necting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function.
Routing the Optical Cable
Precaution:
•Try not to bend the optical cable sharply. If it is necessary to bend it sharply, make sure that the bending radius is at least 25 mm (1 inch), oth- erwise the cable will not transfer signals prop- erly and so this unit will not work properly.
•Route the optical cable so that nothing heavy rests on it, and so that it cannot be stepped on or caught in anything – for instance, a door.
•Make a loop of diameter at least 200 mm
•When plugging the optical cable into the unit, use the supplied cable clamps to prevent the cable from being bent sharply.
•Route the optical cable so that it does not get caught in moving parts such as the gear shift, hand brake, or seat sliding mechanism. Keep the cable away from hot spots, such as near the heater outlet.
7Using the Corrugated Tube
To prevent the optical cable from being strained, use the corrugated tube after cutting it to the correct length.
•Insert the optical cable into the corrugated tube.
Optical cable
Corrugated tube
7Mounting the Clamp
The clamp is used to secure the optical cable when using it.
1.Insert the clamp in the direction indicated in the figure, and turn it 90 degrees to lock.
RESET |
Clamp
2. Secure the optical cable.
RESET |
Installation
80