02Connecting up
Easy connections
L |
R |
AUDIO IN |
VIDEO IN |
TV |
CONTROL
AC IN | IR |
| |
| SETTING 2 |
| SETTING 1 |
IN
VIDEO OUT
IN |
| Y |
|
| VIDEO OUT |
|
| DIGITAL AUDIO OUT |
HDMI OUT | LAN(10/100) | PB |
AUDIO OUT | AUDIO OUT |
(5.1ch) | (2ch) |
CENTER SURROUND | FRONT |
L | L |
IR RECEIVER
S | PR |
|
|
| COMPONENT | COAXIAL | OPTICAL |
| VIDEO OUT |
|
|
SUB WOOFER
R
R
AUDIO OUT
To power outlet 
This is a basic setup that allows you to watch discs on your TV using just the cables supplied.
Important
•This player is equipped with copy protection technology. Do not connect this player to your TV via a VCR using AV cables, as the picture from this player will not appear properly on your TV. (This player may also not be compatible with some combination TV/ VCRs for the same reason; refer to the manufacturer for more information.)
•Do not unplug the player from the power outlet while it is switched on.
•Do not plug this player into a switched power supply found on some amplifiers and AV receivers.
1Connect the VIDEO OUT and one pair of AUDIO OUT jacks to a set of audio/video inputs on your TV.
Use the supplied red/white stereo audio and yellow video cables. Make sure you match up the left and right audio outputs with their corresponding inputs for correct stereo sound.
See Using other types of video output below if you want to use a different type of connection.
Using other types of video output
This player has standard (composite),
In order to be able to watch HD (high definition) BDs at their full resolution, you should connect the player to your TV using either the component video output, or (even better) the HDMI output.
An HDMI connection will additionally give you HD output when watching DVDs.
If your display has neither of these connection types, an
2Connect the supplied AC power cord to the AC IN inlet, then plug into a power outlet.
12
En
