Initial Setup menu | 08 |
Chapter 8
Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be changed when the player is stopped.
If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.
•Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting | Options | Explanation |
Video Out |
|
|
TV Aspect Ratio | 4:3 (Standard) | Select if you have a standard 4:3 TV. See Changing the output video resolution on page 14. |
|
| When the Output Video Resolution is set to 720p, 1080i or 1080p, video is output in 16:9 widescreen |
|
| format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3 TV, set the Output |
|
| Video Resolution to 480i or 480p. See also Changing the output video resolution on page 14. |
|
|
|
| 16:9 (Widescreen) • | Select if you have a widescreen 16:9 TV. |
|
|
|
4:3 Video Out | Full | 4:3 video material is output without black bars on either side of the picture if the TV Aspect Ratio |
|
| setting (above) is set to 16:9 (Widescreen). |
|
|
|
| Normal • | 4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio setting |
|
| (above) is set to 16:9 (Widescreen). |
|
|
|
DVD 16:9 Video Out | Letter Box • | If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer letterbox |
|
| presentation of 16:9 format DVDs. |
|
|
|
| Pan & Scan | If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer Pan & Scan |
|
| presentation of 16:9 format DVDs. |
|
|
|
Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.
HDMI Color Space | YCbCr • | This is the standard setting for |
| RGB | Use this setting if colors appear overly rich and the black too deep on the RGB |
|
|
|
| RGB | Use if colors are weak and black appears to ‘float’ on the RGB |
|
|
|
When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is
24p Direct Out | On | Gives smooth movement in BD/DVD film material video. This setting is only effective when the player |
|
| is connected to a |
|
|
|
| Off • | Choose this setting if you notice picture disturbance when the video switches between video and |
|
| film material. |
|
|
|
When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video resolution on page 14.
41
En
