Pioneer CLD-V5000 ■ ■ ■ ■ ■ ■ ■ User’s Area ■ ■ ■ ■ ■ ■, ■ ■ ■ ■ ■ 10 lines x 20 Characters ■ ■ ■ ■, To activate the User Display Area:

Chapter Three • CLD-V5000 Level III

Line 0 is used for displaying chapter, frame, time and track numbers.

Chapter (CAV or CLV) (2)				Frame (CAV) or Time (CLV) (5)
	Track-Index (CD) (4)
					Time or Time+ Block (CD) (4 or 6)
		Line 0	■ ■ ■	■	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		Line 1	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		2	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		3	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		4	■ ■ ■ ■ ■ ■ ■ User’s Area ■ ■ ■ ■ ■ ■
		5	■ ■ ■ ■ ■ 10 lines x 20 Characters ■ ■ ■ ■
		6	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		7	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		8	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
		9	■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Figure 3-S

Line 0 and 1 are sometimes used for displaying remote control inputs. Line 2 to 9 are used exclusively as the User’s Display Area on the CLD-V5000.

If all lines of the User’s Display Area are required for user defined messages, the 4RA command can be sent to the player. This will reserve all lines (including lines 0 and 1) in the display for user messages.

NOTE: Lines 0 & 1 are usually reserved for frame/time and chapter/track addresses and the address flag status.

To activate the User Display Area:

•Set the User’s Display using the Register A command.

•Turn ON the display switch. (1DS)

•Identify the line on which the characters will appear by using the Print Character command (PR) <CR>. (See page 3-30.)

•Then send the character string to be displayed followed by <C/R>.

NOTE: The display switch can be turned ON or OFF at any time. However, if Register A is changed so that the User’s Display Area is disabled, the contents of the User’s Display Area will be cleared. Also, if the Print Character command is issued before Register A is set for the User’s Display Area, the character string will not be seen. The Power-On default for display control is 3RA. This allows Frame/Time, Chapter/Track numbers to be seen when the display is turned on, depending on the type of disc that is in the tray. Register A may be changed for different displays. See example below:

3-40 TP 121 v. 1.0 • 1/96 CLD-V5000 Level III User’s Manual