RCENSOR button
Press:
The track is played in the reverse direction while the [CENSOR] button is pressed, and normal playback resumes when the button is released.
!Even during playback in the reverse direction, normal playback continues in the background. When the button is released, play- back resumes from the point reached in the background.
[SHIFT] + press:
The track is played in the reverse direction. When the [SHIFT] and [CENSOR] buttons are pressed again, reverse playback is canceled and normal playback resumes.
SPANEL SELECT button
Press:
The panel display switches in the order below each time the button is pressed.
Panel display off l [REC] panel l [FX] panel l
[SHIFT] + press:
The panel display switches in the order below each time the button is pressed.
Panel display off l
!When
Mixer section
| 1 2 | 1 2 | 1 2 | 1 2 |
|
3 |
| c |
|
| 3 |
| 5 |
| 5 |
| |
4 | d |
| 4 | ||
|
|
|
|
| |
5 |
| 4 | 4 |
| 5 |
|
|
|
|
e
6 
f
6
7
7 8 
g
9 
8
| h |
a | 9 |
| b |
1FX 1 assign button
Turns effect unit FX1 on and off for the respective channel.
2FX 2 assign button
Turns effect unit FX2 on and off for the respective channel.
3TRIM control
Adjusts the individual channel output gain.
4EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
14En
5Channel Level Indicator
Displays the sound level of the respective channels before passing through the channel faders.
6FILTER control
Applies the filter effect for the respective channel.
The original sound is output when the control is at the center position.
Turn counterclockwise: Gradually decreases the
Turn clockwise: Gradually increases the
7Headphones CUE/MIC TALK OVER button
Press:
The sound of channels for which the headphones [CUE] button is pressed is output to the headphones.
!When the headphones [CUE] button is pressed again, monitoring is canceled.
When the [INPUT SELECT] switch for channel 3 or 4 is set to [MIC1] or [MIC2], the talkover function can be turned on or off.
When the talkover function is on, the headphones [CUE/
MIC TALK OVER] button flashes. When a sound of over
!The talkover function for both the microphone connected to the [MIC1] terminal and the microphone connected to the [MIC2] terminal can be turned on and off by pressing the headphones [CUE/MIC TALK OVER] button for either channel 3 or channel 4.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
!When the Tap function is used, the display of the deck section on the computer’s screen switches to the [Beatgrid Editer] display. Click [Edit Grid] on the computer’s screen.
8Headphones CUE button
Press:
The sound of channels for which the headphones [CUE] button is pressed is output to the headphones.
!When the headphones [CUE] button is pressed again, monitoring is canceled.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
!When the Tap function is used, the display of the deck section on the computer’s screen switches to the [Beatgrid Editer] display. Click [Edit Grid] on the computer’s screen.
9Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Use the channel fader start function.
For details on the channel fader start function, see Using the channel fader start function on page 25.
ACrossfader Assign Switch
Assigns the channel output to the crossfader. [A]: Assigns to [A] (left) of the crossfader. [B]: Assigns to [B] (right) of the crossfader.
[THRU]: Selects this when you do not want to use the crossfader. (The signals do not pass through the crossfader.)
BCrossfader
Outputs the sound assigned with the crossfader assign switch.
CMASTER LEVEL control
Adjusts the master sound level output.
DMaster level indicator
Displays the master output’s audio level.
EBooth monitor level control
Adjusts the level of audio signals output from the [BOOTH] terminal.