Problem | Check | Remedy |
|
|
|
Serato DJ operation is unstable.
Are you using the latest version of the software? | Free updates of Serato DJ can be downloaded from the website. Use the most |
| recent version. (page 6) |
|
|
Are you using softwares other than Serato DJ at | Quit other applications to decrease the load on the computer. |
the same time? | If operation continues to be unstable, try disabling the wireless network or other |
| wireless connections, antivirus software, the screen saver, the low power mode, |
| etc. |
| (page 6) |
When other USB devices are connected to the computer.
Disconnect other USB devices from the computer.
When another USB audio device is connected to the computer at the same time, it may not operate or be recognized normally.
Are you using a USB hub?
USB hubs cannot be used. Connect the computer and this unit directly using the included USB cable.
There is a problem with the USB port to which this | If your computer has multiple USB ports, try connecting this unit to a different |
unit is connected. | USB port. |
|
|
Is this unit connected to a notebook computer | Supply power to the notebook computer from an AC power supply. |
running on its battery? | (Depending on the notebook computer’s settings, the low power mode may be |
| set when the computer is running on its battery, automatically reducing the |
| performance of the computer itself.) (page 6) |
|
|
The USB buffer size is too small. | Raise the USB buffer size. (page 8) |
The jog dial illumination does not turn Are the utility settings wrong? during playback. (It does turn when
scratching.)
The [TEMPO] slider does not work when the deck is switched while the sync mode is set. (The TAKEOVER indicator lights.)
Check that “Setting for using Serato DJ” is set in the utility settings.
The channel fader start function does Is a cue set? | Set a cue. (page 25) | |
not work. | Are the utility settings wrong? | In the utility settings, set the channel fader start setting to “Channel fader start |
| ||
with the sync mode set” or “Channel fader start without the sync mode set”.
The BPM is not displayed.
The sync and auto loop functions do not work.
Has the track been analyzed? | Analyze the file. |
|
|
Is [Set Auto BPM] checked in the offline player | |
settings? | For detailed instructions on analyzing tracks, see the Serato DJ software |
| manual. |
The BPM is displayed but not the beatgrid.
The slicer function does not work. The skip mode does not work.
Are [Set Auto BPM] and [Set Beatgrid] checked in the offline player settings?
Set the beatgrid. For detailed instructions on setting the beatgrid, see the Serato DJ software manual.
Beatgrids can also be set using this unit’s [GRID ADJUST] and [GRID SLIDE] buttons. (page 13)
The BPM and beatgrid are not displayed properly.
The beatgrid is off beat.
Is the BPM analysis range set appropriately in the offline player settings?
Change the BPM analysis range then reanalyze the tracks. If the problem per- sists, set the beatgrid and BPM manually.
Adjust the beatgrid. For detailed instructions on adjusting the beatgrid, see the Serato DJ software manual.
The beatgrid can be adjusted using this unit’s [GRID ADJUST] and [GRID SLIDE] buttons.
During playback of the track and while pressing the [SHIFT] button, tap the headphones [CUE] or headphones [CUE/MIC TALK OVER] button in beat (Tap function). The track’s BPM and beat grid can be adjusted.
When the Tap function is used, the display of the deck section on the computer’s screen switches to the [Beatgrid Editer] display. Click [Edit Grid] on the com- puter’s screen. (page 14)
30En