2Press the rotary selector, move the cursor to the library on the computer’s screen, then turn the rotary selector and select the track.

a

b

aLibrary

bCrates panel

3 Press the [LOAD] button to load the selected track onto the deck.

Playing tracks and outputting the sound

The following describes the procedure for outputting the channel 1 sound as an example.

!Set the volume of the devices (power amplifier, powered speakers, etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level. Note that loud sound will be output if the volume is set too high.

4 a 5

b

6 c 7

d

8

9

e

4TRIM control

5EQ (HI, MID, LOW) controls

6FILTER control

7Headphones CUE button

8Channel fader

9Crossfader Assign Switch

AMASTER LEVEL control

BBOOTH MONITOR LEVEL control

CHEADPHONES MIXING control

DMASTER CUE button

ECrossfader

FHEADPHONES LEVEL control

GINPUT SELECT switch

HCrossfader curve selector control

1Set the positions of the controls, etc., as shown below.

Names of controls, etc.

Position

MASTER LEVEL control

Turned fully counterclockwise

TRIM control

Turned fully counterclockwise

EQ (HI, MID, LOW) controls

Center

FILTER control

Center

Channel fader

Moved forward

Crossfader Assign Switch

[THRU] position

INPUT SELECT switch

[PC] position

f

g

h

20En