Mixer section
1 | a |
| 1 |
|
|
| |
2 | 3 | 3 | 4 |
| b |
|
|
3 | 2 | 2 | 3 |
|
| ||
| c |
|
|
4 | d |
| 4 |
5 |
|
| 7 |
6 |
|
| 8 |
| e |
|
|
7 |
|
| 6 |
8 |
|
| 7 |
|
| 9 |
|
1TRIM control
2EQ (HI, MID, LOW) controls
3Channel Level Indicator
4FILTER control
5Headphones CUE/MIC TALK OVER button
6Headphones CUE button
7Channel fader
8Crossfader Assign Switch
9Crossfader
AMASTER LEVEL control
BMaster level indicator
CBooth monitor level control
DHEADPHONES MIXING control
EMASTER CUE button
Front panel
1 | 2 | 3 | 3 | 2 | 4 |
1HEADPHONES LEVEL control
2INPUT SELECT switch
3INPUT SELECT switch
4Crossfader curve selector control
Mixing the sound of the microphone
1Connect a microphone to the [MIC1] or [MIC2] terminal.
2Start up the system.
= Starting the system (p.18)
3Set the [INPUT SELECT] switch to [MIC1] or [MIC2].
4Operate the [TRIM] control and the channel faders to adjust the audio level output from the respective decks.
!The sound can be adjusted with the [EQ (HI, MID, LOW)] con- trols, and filter effects can be applied to the respective channels with the [FILTER] control.
Mixing the sound of a DJ player, etc.
1Connect the DJ player or other line level output device to the [CD] or [PHONO/LINE] terminals.
2Start up the system.
=Starting the system (p.18)
3Set the [INPUT SELECT] switch to [CD] or [LINE].
4Operate the [TRIM] control and the channel faders to adjust the audio level output from the respective decks.
!The sound can be adjusted with the [EQ (HI, MID, LOW)] con- trols, and filter effects can be applied to the respective channels with the [FILTER] control.
Mixing the sound of an analog turntable, etc.
1Connect the analog player or other phono level (for MM cartridges) output device to the [PHONO/LINE] terminals.
2Start up the system.
=Starting the system (p.18)
3Set the [INPUT SELECT] switch to [PHONO].
4Operate the [TRIM] control and the channel faders to adjust the audio level output from the respective decks.
!The sound can be adjusted with the [EQ (HI, MID, LOW)] con- trols, and filter effects can be applied to the respective channels with the [FILTER] control.
28En