Audio Adjustments
2Select LOUD on or off with 5/∞.
3Select the desired level with 2/3.
LOW (low)
Note
•You can also switch LOUD on or off by press- ing the LOUDNESS. 
Front image enhancer (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and
Precaution
•When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.
1 Press AUDIO to select FIE.
Press AUDIO until FIE appears in the display.
2Select FIE on or off with 5/∞.
3Select the desired frequency with 2/3.
Notes
•After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced.
•Switch the F.I.E. function OFF when using a 2- speaker system. 
Adjusting source levels
SLA (Source level adjustment) lets you adjust | English |
| |
the volume level of each source to prevent radi- |
|
cal changes in volume when switching between |
|
sources. |
|
•Settings are based on the volume level of the FM tuner, which remains unchanged.
1 | Compare the FM tuner volume level with | Español |
| ||
the level of the source you wish to adjust. |
| |
2 | Press AUDIO to select SLA. |
|
Press AUDIO until SLA appears in the display.
3 Press 5 or ∞ to adjust the source volume. | Deutsch | |||
Each press of 5 or ∞ increases or decreases | ||||
| ||||
the source volume. |
| |||
• SLA +4 – SLA |
| |||
volume is increased or decreased. |
| |||
|
| Notes |
| |
|
|
| ||
|
|
|
| |
• Since the FM tuner volume is the control, it is | Français | |||
• The AM tuner volume level can also be | ||||
| not possible to apply source level adjustments |
| ||
| to the FM tuner. |
| ||
| adjusted with source level adjustments. |
| ||
|
|
| Italiano | |
Nederlands
En 12
