Other Functions
Setting the time
This is used to set the time on the unit’s clock display.
1Press SOURCE and hold until the unit turns off.
2Press AUDIO and hold until TIME (12:00) appears in the display.
3Select the portion of the time display you wish to set with 2/3.
Pressing 2/3 will select a portion of the clock display:
As you select portions of the clock display the portion selected will blink.
4Select the correct time with 5/∞. Pressing 5 will increase the selected hour or minute. Pressing ∞ will decrease the selected hour or minute.
• To cancel time settings, press BAND.
• You can also cancel time settings by holding down AUDIO until the unit turns off. 
Setting the time display on or off
You can turn the time display on even when the sources are off.
Press CLOCK to select the time display.
Each press of CLOCK turns time display on or off.
•The time display disappears temporarily when you perform other operations, but the time indi- cation is displayed again after 25 seconds. 
13En
