Additional Information
Understanding built-in CD player error messages
When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center.
Message | Cause | Action |
|
|
|
ERR 11, 12, 17, | Dirty disc | Clean disc. |
30 |
|
|
|
|
|
ERR 11, 12, 17, | Scratched disc | Replace disc. |
30 |
|
|
|
|
|
ERR 14 | Blank disc | Check the disc. |
|
|
|
ERR 10, 11, 12, | Electrical or | Turn the ignition |
14, 17, 30, A0 | mechanical | ON and OFF, or |
|
| switch to a |
|
| different source, |
|
| then back to the |
|
| CD player. |
|
|
|
HEAT | CD player over- | Turn off the CD |
| heated | player until the |
|
| CD player cools |
|
| down. |
|
|
|
