Installation
Installation
Section
03
2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
1
2
1Dashboard
2Mounting sleeve
3Install the unit as illustrated. 1
2
3
4
5
DIN Rear-mount
1Determine the appropriate position where the holes on the bracket and the side of the unit match.
2 Tighten two screws on each side.
1 | 3 |
|
2
1Screw
2Mounting bracket
3Dashboard or console
!Use either truss (5 mm × 8 mm) or flush sur- face (5 mm × 9 mm) screws, depending on the bracket screw holes.
2 Insert the supplied extraction keys into | Installing the microphone | |
both sides of the unit until they click into |
| |
place. | CAUTION | |
| ||
3 Pull the unit out of the dashboard. | It is extremely dangerous to allow the micro- | |
phone lead to become wound around the steer- | ||
| ||
| ing column or gearstick. Be sure to install the | |
| unit in such a way that it will not obstruct driv- | |
| ing. | |
| Note | |
| Install the microphone in a position and orienta- | |
| tion that will enable it to pick up the voice of the | |
Removing and | person operating the system. | |
| ||
front panel | When installing the microphone | |
You can remove the front panel to protect your | ||
on the sun visor | ||
unit from theft. |
| |
Press the detach button and push the front | 1 Install the microphone on the micro- | |
panel upward and pull it toward you. | phone clip. | |
For details, refer to Removing the front panel to | 1 | |
| ||
Securing the front panel | 2 | |
The front panel can be secured with the sup- |
| |
plied screw. |
|
English
1Nut
2Firewall or metal support
3Metal strap
4Screw
5Screw (M4 × 8)
#Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.
Removing the unit
1 Remove the trim ring.
1Trim ring
2Notched tab
!Releasing the front panel allows easier ac- cess to the trim ring.
!When reattaching the trim ring, point the side with the notched tab down.
1 | Microphone |
2 | Microphone clip |
1 |
|
2 Install the microphone clip on the sun
1 Screwvisor.
With the sun visor up, install the microphone clip. (Lowering the sun visor reduces the voice recognition rate.)
En 13