Pioneer DEH-P410UB operation manual Tuner, Basic Operations, Adjusting the volume

	Section
Operating this unit	02

!AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxili- ary setting on page 29).

!Charging the portable audio player using car’s DC power source while connecting it to AUX input may generate noise. In this case, stop charging.

!External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit.

!When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Tuner

Basic Operations

%Select a band

Press BAND/ESC.

# Band can be selected from among FM1, FM2, FM3 or AM.

%Manual tuning (step by step)

Push MULTI-CONTROL left or right.

%Seek tuning

Push and hold MULTI-CONTROL left or right, and then release.

#You can cancel seek tuning by pushing MULTI-CONTROL left or right.

#While pushing and holding MULTI-CONTROL left or right, you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

English

Adjusting the volume

%Turn MULTI-CONTROL to adjust the sound level.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number. Press and

hold to store.

# You can also store the frequency in memory by pushing and holding MULTI-CONTROL right.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

En 13