Pioneer DEH-P410UB Initial Settings, Switching the feature demo, Setting the rear output

Section

04 Initial Settings

2	Press MULTI-CONTROL to turn dimmer	Switching the feature demo
on.		The feature demo automatically starts when
#	To turn dimmer off, press MULTI-CONTROL

again.	power to this unit is turned off while the igni-
	tion switch is set to ACC or ON.
Setting the rear output and	1 Use MULTI-CONTROL to select DEMO.
	2 Press MULTI-CONTROL to turn the fea-
subwoofer controller
	ture demo on.

This unit’s rear output (rear speaker leads out- put) can be used for full-range speaker (FULL) or subwoofer (SUB W) connection. If you switch the rear output setting to SUB W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speak- er connection (FULL).

1Use MULTI-CONTROL to select

SW CONTROL.

2Press MULTI-CONTROL to display the setting mode.

#Press BACK to return to the previous display.

3Use MULTI-CONTROL to select the de- sired setting.

Turn to change the setting.

SUB W (subwoofer)—FULL (full-range speak- er)

#When no subwoofer is connected to the rear output, select FULL (full-range speaker).

#When a subwoofer is connected to the rear output, select SUB W (subwoofer).

Notes

!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 27).

!If you change this setting, subwoofer output

in the audio menu return to the factory settings.

#To turn the feature demo off, press MULTI-CONTROL again.

Notes

!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

!You can also turn on or off feature demo by pressing DISP while this unit is turned off. For

more details, see About the demo mode on page 8.

Switching the ever scroll

When Ever Scroll is set to ON, recorded text in- formation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Use MULTI-CONTROL to select

EVER SCROLL.

2Press MULTI-CONTROL to turn the ever

scroll on.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Activating the BT AUDIO source

You need to activate the BT AUDIO source in order to use a Bluetooth audio player.

!You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is con- nected to this unit.

1Use MULTI-CONTROL to select

BT AUDIO.

30 En