Philips SJM3152/17 To return to the Set-up menu, select Exit and press OK, About RF settings

•Select the delay you want to add.

Press OK. See instructions at the end of this procedure, “To select the delay you want”.

Keep in mind that an activity contains a maximum of 25 steps.

When you have added all key presses and delays, select “No”. Press OK.The activity is installed on your universal remote for iPod™.

4.To return to the Set-up menu, select “Exit”. Press OK.

To select the delay you want:

1.Use the cursor keys to scroll through the list of possible delays.

2.Press OK on desired delay.You’ll see confirmation screen.

3.Press YES to add another key or delay. Press NO to exit activity set-up.

ETip

Start up the activity by pressing the Mode key repeatedly until the activity name appears in the header of the universal remote for iPod™ display screen. Press OK .

5.6 Deleting an activity

To delete an activity from your remote control:

1.Select the option “Delete an Activity” in the Set-up menu by using the cursor keys Press OK.

2.Select the activity you want to delete. Press OK.

3.Confirm you want to delete the activity by selecting “Yes”. Press OK.The activity is deleted and becomes available again in the list of activities you can add.

4.To return to the Set-up menu, select “Exit” and press OK.

5.7 About RF settings

Show details:

You can check the status of the connection between the docking cradle and remote:

1.Select the option “RF Settings” in the Set- up menu by using the cursor keys. Press

OK.

2.Select “Show details.” Press OK The name of the connected docking cradle and the strength of the signal appear.

3.To return to the Set-up menu, select “Next”. Press OK.

DNote

When the details of the RF Settings show “No Connection”, the remote is unable to connect to the docking cradle. If this occurs, you must reconnect to the dock.

Reconnect to dock

When you want to use your universal remote for iPod™ with another docking cradle, or in case of technical problems, you will have to pair the remote to the docking cradle again.

1.Press and release reconnect button at the bottom of the iPod™ docking cradle

ENGLISH

Use more of your universal remote and docking cradle for iPod 19