Philips SJM3152/17 manual Getting Started, Prepare, Connect

3 Getting Started

BWarning

Carefully read the safety precautions in section

1.1Important, before connecting your universal remote and docking cradle for iPod™.

This section helps you with the first time installation of your universal remote and docking cradle for iPod™.

3.1Prepare

1.Remove all package contents

2.Position your dock near your home entertainment system, stereo or TV.

3.Turn off power on all your home entertainment components.

4.Locate the nearest electrical wall outlet.

5.Remove the protective screen cover from your universal remote for iPod™.

6.Remove iPod™ connector protective cover on the docking cradle.

7.Select the correct dock adapter for your specific iPod™ model.

8.Insert the correct dock adapter into the universal well on your docking cradle.

3.2 Connect

For stereo playback:

1.Connect the red and white RCA connectors on one end of the supplied AV cable to the Audio In RCA jacks on your home entertainment system or stereo.

DNote

If you are not using the device with video, or you plan on connecting to video via the S-Video connection, leave the yellow RCA connector end unplugged.

2.Connect the other end of the supplied AV cable with 3.5mm plug to the jack labeled “AV” on your docking cradle.

3.Connect one end of the power cord to an electrical outlet and the other end to the DC 12V jack on the back of your docking cradle.

4.Install the 3 supplied AA batteries into the battery compartment on the remote. Follow the proper polarity markings in the compartment.

For video playback:

1.Connect one end of the supplied S -Video cable to the Video In jack on your home entertainment system or TV.

2.Connect the other end of the supplied S-Video cable to the jack labeled “S-Video” on your docking cradle. If you are using the composite video jacks, plug the yellow RCA plug into the RCA video jack on your TV.

3.Connect one end of the power cord to an electrical outlet. Connect the other end to the DC 12V jack on the back of your docking cradle.

4.Install the 3 supplied AA batteries into the battery compartment on the remote. Follow the proper polarity markings in the compartment.

ENGLISH

Getting Started 9