Philips SJM3152/17 manual English

4.Select the device and brand of the device you want to add by using the cursor keys. Press OK. The remote will search the database for available code sets.

5.Follow the on-screen instructions to test the codes.When a working code set is found, your device is correctly installed. When the device is correctly installed, the following screen appears:

If no working code set is found:

•You can perform a full data base search to find a correct code set.This can take up to 25 minutes.

•You can learn codes from the original remote device.

To add an additional device:

1.Select “Yes”, Press OK.

2.Repeat this process for each additional device.

3.When you are finished adding devices, select “No”. Press OK. Exit the wizard.

DNote

You can adjust the settings of your universal remote for iPod™ anytime after initial install via the set-up menu. Press the MODE and IPod™ LAUNCH keys simultaneously for 3 seconds.

The screen will ask you to press and hold the 2 keys for 3 seconds to enter set-up mode.

ENGLISH

Getting Started 11