Pioneer DEH-P410UB operation manual Bluetooth Telephone, Displaying BD Bluetooth Device address

Available accessories

Section

06

Displaying BD (Bluetooth Device) address

1Use MULTI-CONTROL to select DEVICE INFO in the function menu.

2Press MULTI-CONTROL to display the setting mode.

3Use MULTI-CONTROL to select the de- sired setting.

Turn to change the setting.

DEVICE NAME (Device name)—BD ADDRESS (BD (Bluetooth Device) address)

Bluetooth Telephone

Setting up for hands-free phoning

Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. This entails establishing a Bluetooth wireless connection between this unit and your phone, registering your phone with this unit, and adjusting the volume level.

1 Connection

For detailed instructions on connecting your phone to this unit via Bluetooth wireless tech- nology, refer to Connecting a cellular phone on page 39.

#Your phone should now be temporarily con- nected. However, to make best use of the technol- ogy, we recommend you register the phone to this unit.

English

Basic Operations

If you use a Bluetooth adapter (e.g. CD- BTB200), you can connect a cellular phone fea- turing Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving.

Important

!Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage.

!Advanced operations that require your atten- tion such as dialing numbers on the monitor, using phone book, etc., are prohibited while you are driving. When you need to use these advanced operations, stop your vehicle in a safe place.

Notes

!The equalizer curve for the phone source is fixed.

!When selecting the phone source, you can only operate FADER/BALANCE (balance ad- justment) in the audio menu.

2 Registration

To register your temporarily connected phone, refer to Registering a connected cellular phone on page 40.

3 Volume adjustment

Adjust the earpiece volume on your cellular phone for comfort. When adjusted, the volume level is recorded in this unit as the default set- ting.

#Caller’s voice volume and ring volume may vary depending on the type of cellular phone.

#If the difference between the ring volume and caller’s voice volume is big, overall volume level may become unstable.

#Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cel- lular phone remains muted even after the cellular phone is disconnected.

En 37