Pioneer DEH-P5950IB Operating this unit Other Functions, Turning the clock display on or off

Black plate (23,1)

Operating this unit

Other Functions	% Use an IP-BUS-RCA Interconnector such
Turning the clock display on or off	as the CD-RB20/CD-RB10 (sold separetely)
	to connect this unit to auxiliary equipment
You can turn the clock display on or off.	featuring RCA output.
! Even when the sources and the feature	For more details, refer to the IP-BUS-RCA Inter-
demo are off, the clock display appears on	connector owner’s manual.
the display.	The allocation of this auxiliary equipment is
% Press CLOCK to turn the clock display	automatically set to AUX2.
	# You can only make this type of connection if
on or off.	the auxiliary equipment has RCA outputs.
Each press of CLOCK turns the clock display
on or off.	Selecting AUX as the source
# The clock display disappears temporarily
	% Press SOURCE to select AUX (AUX1 or
when you perform other operations, but the clock
display appears again after 25 seconds.	AUX2) as the source.
	# If the auxiliary setting is not turned on, AUX
Using the AUX source	cannot be selected. For more details, see Switch-
	ing the auxiliary setting on page 21.
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold	Setting the AUX title
separately). When connected, auxiliary equip-
	The title displayed for each AUX1 or AUX2
ments are automatically read in as AUX
	source can be changed.
sources and assigned to AUX1 or AUX2. The
relationship between AUX1 and AUX2	1 After you have selected AUX as the
sources is explained below.
	source, press FUNCTION and hold until
	TITLE IN appears in the display.
About AUX1 and AUX2	2 Enter a title in the same way as the
You have two methods to connect auxiliary
	built-in CD player.
equipments to this unit.
	For details concerning operation, refer to En-
AUX1 source:	tering disc titles on page 13.
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)

Section

02

English

En 23

<XRD7120-A/N>23