Black plate (9,1)
Operating this unit
! When this unit’s blue/white lead is connected | Tuner | |
to the vehicle’s | Basic Operations | |
terminal, the vehicle’s antenna extends when | ||
this unit’s source is turned on. To retract the | Important | |
antenna, turn the source off. | ||
| ||
| If you are using this unit in North, Central or | |
Adjusting the volume | South America, reset the AM tuning step (see | |
Setting the AM tuning step on page 21). |
% Use VOLUME to adjust the sound level.
Turning the unit off |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
% Press SOURCE and hold until the unit |
|
|
|
|
|
|
|
| |
turns off. | |||||||||
|
|
|
|
|
|
|
| ||
Section
02
English
1Band indicator
2Preset number indicator
3LOC indicator
Shows when local seek tuning is on.
4Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
5Frequency indicator
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band is dis- played, FM1, FM2, FM3 for FM or AM.
3To perform manual tuning, briefly press c or d.
4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.
En | 9 |
