Pioneer DEH-P6400 operation manual Audio Adjustments, Introduction of audio adjustments

Audio Adjustments

Introduction of audio adjustments

1

1AUDIO display

Shows the audio adjustments status.

Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions:

Fad (balance adjustment)—EQ(equalizer curve adjustment)—Bass(bass)—Treble(treble)— Loud (loudness)—Sub-W1(subwoofer1)—Sub- W2 (subwoofer2)—SLA(source level adjust- ment)

•When selecting the FM tuner as the source, you cannot switch to SLA.

•To return to the playback display, press

BAND/ESC.

Note

•If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

•Audio menu functions change depending on the rear output setteing in the initial setting menu. Refer to setting the rear output on page 34.

Section

06

Setting the sound focus equal-
izer	English
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.	Español
FRT2 boosts the treble and the bass on the front
• FRT1 boosts the treble on the front output and
the bass on the rear output.
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both FRT1 and FRT2 the H setting provides a
more pronounced effect than the L setting.	Deutsch
1 Press SFEQ to select the desired SFEQ
mode.
FRT1-H(front1-high) —FRT1-L(front1-low) —
FRT2-H(front2-high) —FRT2-L(front2-low) —
CUSTOM (custom) —SFEQ OFF (off)
2 Press 2 or 3 to select the desired position.	Français
LEFT (left) —CENTER(center) —RIGHT(right)
Press 2 or 3 until the desired position appears
in the display.
Notes
• If you adjust the bass or treble, CUSTOM	Italiano
ence.
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
	Nederlands

En 27