Section
06Audio Adjustments
Using balance adjustment
You can select a fader/balance setting that pro- vides an ideal listening environment in all occu- pied seats.
1 Press AUDIO to select Fad.
Press AUDIO until Fad appears in the display.
•If the balance setting has been previously adjusted, Bal will be displayed.
2Press 5 or ∞ to adjust front/rear speaker balance.
Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear.
• Fad F15 – Fad R15 is displayed as the front/rear speaker balance moves from front to rear.
• Fad 0 is the proper setting when only two speakers are used.
• When the rear output setting is FRT+SW, you cannot adjust front/rear speaker balance. Refer to Switching the rear output setting on page 34.
3Press 2 or 3 to adjust left/right speaker balance.
When you press 2 or 3, Bal 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right.
• Bal L9 – Bal R9 is displayed as the left/right speaker balance moves from left to right.
Using the equalizer
The graphic equalizer lets you adjust the equal- ization to match car interior acoustic character- istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display | Equalizer curve |
|
|
SUPER BASS | Super bass |
|
|
POWERFUL | Powerful |
|
|
NATURAL | Natural |
|
|
VOCAL | Vocal |
|
|
CUSTOM1,2 | Custom1,2 |
|
|
FLAT | Flat |
|
|
•CUSTOM1 and CUSTOM2 are adjusted equal- izer curve.
•A separate CUSTOM1 curve can be created for each source. (The
•If you make adjustments when a curve other than CUSTOM2 is selected, the equalizer curve settings are memorized in CUSTOM1.
•A CUSTOM2 curve can be created common to all sources.
•If you make adjustments when the CUSTOM2 curve is selected, the CUSTOM2 curve is updated.
•When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.
28En