Pioneer DEH-P6400 operation manual Additional Information, CD player and care, Display the ID Code

Section

08Other Functions

Display the ID Code

Each XM tuner is identified with a unique radio ID. You will need the radio ID when activating XM service or when reporting a problem. How to display the ID code depends on the channel select mode.

Channel number select mode

If you select CH 000, the ID code is displayed.

• Select the CH 000 with the 2/3

Channel category select mode

RADIO ID is provided as a channel category for displaying the ID code.

•Select the Channel Category RADIO ID with the 5/∞ buttons.

•If you select another channel, display of the ID code is canceled.

•Display of the ID code repeats displaying RADIO ID and the ID code one after the other..

Additional Information

CD player and care

•Use only CDs that have either of the two Compact Disc Digital Audio marks as show below.

•Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly.

•Check all CDs for cracks, scratches or warped discs before playing. CDs that have cracks, scratches or are warped may not play prop- erly. Do not use such discs.

•Avoid touching the recorded (non-printed side) surface when handling the disc.

•Store discs in their cases when not in use.

•Keep discs out of direct sunlight and do not expose the discs to high temperatures.

•Do not attach labels, write on or apply chemi- cals to the surface of the discs.

•To clean dirt from a CD, wipe the disc with a soft cloth outward from the center of the disc.

•If the heater is used in cold weather, moisture may form on components inside the CD player. Condensation may cause the CD player to not operate properly. If you think that condensation is a problem turn off the CD player for an hour or so to allow the CD player to dry out and wipe any damp discs with a soft cloth to remove the moisture.

•Road shocks may interrupt CD playback.

38En