Section
07Initial Settings
Switching the rear output setting
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker or subwoofer connection. If you switch the rear output setting to the subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.
•If you connect a subwoofer to the rear output, set the output setting to subwoofer.
•Even if you change this setting, there is no output unless you switch the subwoofer out- put on (refer to Using subwoofer output on page 30).
•Both rear speaker leads output and RCA rear output are switched simultaneously in this setting.
1 Press FUNCTION to select SW.
Press FUNCTION repeatedly until FRT+REAR appears in the display.
2Select full-range speaker or subwoofer with 2/3.
Pressing 2/3 will switch between FRT+REAR 
Switching the Telephone Muting/Attenuation
Sound from this system is muted or attenuated automatically when a call is made or received using a cellular telephone connected to this product.
1 Press FUNCTION to select TEL.
Press FUNCTION repeatedly until Telephone appears in the display.
2Switch the telephone muting/attenuation with 2/3.
Pressing 2/3 will switch between Telephone :ATT (attenuation) and Telephone :MUTE (mut- ing) and that status will be displayed. 
34En
