LAN Setup,  To change the LAN settings | NETGEAR WNDR4500 instruction

N900 Wireless Dual Band Gigabit Router WNDR4500

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s default LAN IP configuration is:

•LAN IP address. 192.168.1.1

•Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks and should be suitable for most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in the LAN Setup screen.

To change the LAN settings:

Note: If you change the LAN IP address of the router while connected through the browser, you will be disconnected. You will have to open a new connection to the new IP address and log in again.

1.Select Advanced > Setup > LAN Setup to display the following screen:

2.Enter the settings that you want to customize. These settings are described in the following section, LAN Setup Screen Settings.

3.Click Apply to save your changes.

Genie Advanced Home

36

Image 36

NETGEAR WNDR4500 user manual LAN Setup,  To change the LAN settings

Contents

N900 Wireless Dual Band Gigabit Router WNDR4500 Technical Support TrademarksStatement of Conditions Contents Genie Advanced Home Administration Appendix a Supplemental Information Hardware Setup Unpack Your Router Position Your Router Hardware Features Front Panel LED Back Panel Router, rear view Label Getting Started with Netgear Genie Router Setup Preparation Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp Netgear Genie Setup  To use Netgear Genie to set up your routerBrowse to http//routerlogin.net Use Netgear Genie after Installation Upgrade Router Firmware Router Dashboard Basic Home Screen Add Wireless Devices or Computers to Your Network Wi-Fi Protected Setup WPS Method To use WPS to join the wireless network Manual Method Genie Basic Settings Internet Setup Internet Setup Screen FieldsDoes Your ISP Require a Login? Answer either yes or no Internet IP Address Attached Devices Parental Controls ReadySHARE USB Storage Basic Wireless Settings  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network GHz b/g/n and 5.0 GHz a/nRegion Selection Security Options Settings Change WPA Security Option and Passphrase  To set up a guest network Guest Networks Guest Network Wireless Security Options WPA Encryption Genie Advanced Home Setup Wizard WPS Wizard Select Advanced WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup Default DMZ Server  To set up a default DMZ serverChange the MTU Size  To change the MTU size Select Advanced Setup WAN Setup Common MTU Sizes LAN Setup  To change the LAN settings LAN Setup Screen Settings Use the Router as a Dhcp Server Address Reservation  To reserve an IP address Quality of Service QoS Setup Enable WMM QoS for Wireless Multimedia ApplicationsSet Up QoS for Internet Access QoS for Applications and Online Gaming  To create a QoS policy for applications and online games QoS for a Router LAN Port Click the Add Priority Rule button QoS for a MAC Address Click Add Priority Rule Editing or Deleting an Existing QoS Policy  To edit or delete a QoS policy USB Storage ReadySHARE Access USB Drive RequirementsFile-Sharing Scenarios Sharing Photos Storing Files in a Central Location for PrintingSharing Large Files over the Internet  To share files with your friends and family Basic Settings  To access your USB device Add or Edit a Network Folder USB Storage Advanced Settings Available Network Folders Media Server Settings Safely Remove a USB Drive Specify Approved USB Devices Access the Router’s USB Drive Remotely Using FTP  To connect to the router’s USB drive using a web browserConnect to the USB Drive from a Remote Computer Select the Allow only approved devices check box ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 USB Control Center Utility Control Center Configuration USB Printer Scan with a Multi-Function Printer USB Speaker To control a USB speaker Desktop Netgear Genie Security Keyword Blocking of Http Traffic  To delete a keyword or domain To specify a trusted computer Block Services Port Filtering  To block services Schedule Blocking Security Event Email Notifications  To schedule blocking  To set up email notifications Administration Upgrade the Router Firmware Internet Provider WAN Setup View Router StatusRouter Information LAN Port Statistics Button System up time and poll interval statistics Connection Status Button View connection status information Wireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Guest Network 2.4 GHz and 5 GHz Manage the Configuration File Back Up Settings Restore Configuration Settings To restore configuration settings that you backed up Do not interrupt the reboot process Set Password Password Recovery Advanced Settings Advanced Wireless Settings Wireless Repeating Function WDS Wireless repeating scenario Wireless Repeating Function Set Up the Base Station  To set up the base station Set Up a Repeater Unit  To configure the router as a repeater unit Remote Computer Access Basics Port Forwarding and Triggering Port Triggering to Open Incoming Ports Destination port number Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwarding Add a Custom Service Click Edit Service or Delete Service Editing or Deleting a Port Forwarding EntryApplication Example Making a Local Web Server Public  To edit or delete a port forwarding entry Set Up Port Triggering Universal Plug and Play on N900 Wireless Dual Band Gigabit Router WNDR4500 Dynamic DNS Forward traffic to a changing IP address Static Routes  To set up a static route Remote Management USB Settings Universal Plug and Play  To turn on Universal Plug and Play  To set up an IPv6 Internet connection type IPv6Traffic Meter 103 Troubleshooting Wireless Settings Network SettingsQuick Tips Sequence to Restart Your Network Troubleshooting with the LEDs Power/Test LED Is Off or BlinkingPower/Test LED Stays Amber Wireless LEDs Are Off LEDs Never Turn OffInternet or Ethernet Port LEDs Are Off Push N Connect WPS Button Blinks Amber Cannot Access the Internet Cannot Log In to the Router 109 Troubleshooting PPPoE Troubleshooting Internet BrowsingSelect Administration Router Status  To troubleshoot a PPPoE connection Wireless Connectivity Restore the Factory Settings and PasswordWireless Signal Strength Changes Not Saved Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router To ping the router from a running Windows PC Test the Path from Your Computer to a Remote Device Factory Settings Supplemental Information 115 Technical Specifications WNDR4500 Router specifications 117 Netgear Dual Band Wireless Regulatory Compliance InformationEurope EU Declaration of Conformity 119 FCC Requirements for Operation in the United States FCC Caution Industry Canada Important Note Radiation Exposure StatementAvertissement GPL License Agreement Interference Reduction Table Index 124 125 126