Furuno CH-250 manual System Setting 1 menu description

SYSTEM SETTING 1 menu

1.Display the SYSTEM menu and press or to select SYSTEM SETTING.

2.Press .

3.Press to MENU.

4.Press to select “1.”

**SYSTEM SETTING 1 **

MENU			1	2
POSITION	:
			SHIP'S L/L SHIP'S LOP					CURSOR L/L
TRACK	: OFF
					ON
	:				FLOW FROM			FLOW TO
CURRENT DATA			OFF
HEADING INDICATION :			TRUE		AZ
NORTH MARK	:		OFF		ON
CSE DATA	:		NAV		GYRO
NAV DATA	:		GPS		LoranC	LoranA		DR DECCA OTHERS
TVG CORRECTION			OFF	1/2		1/1
UNIT	: m				ft	fa		HIRO	P/B
TEMP	:	￿C			￿F
TARGET L/L	:		OFF		ON
CUSTOM KEY	:
			PRESET KEY		SHORT-CUT KEY
EMPHASIS MODE	: OFF
					NORMAL		RED
ETA MARK	:		OFF		10sec	30sec		1min	3min 6min
: SELECT	: CHANGE			MENU: END

Figure 5-8 System setting 1 menu

SYSTEM SETTING 1 menu description

POSITION: Chooses how to displays ship’s position; latitude and longitude, Decca/Loran LOP or Cursor L/L. (The connected navigator must be capable of displaying L/L or LOP.) The default setting is latitude and longitude. Position data required.

TRACK: Turns the track display on or off on the horizontal display. The track is always shown on the video plotter display regardless of this setting.

CURRENT DATA: Turns current data (tide) on or off. FLOW FROM shows from what direction the current is flowing; FLOW TO shows the direction the current is heading. The default setting is OFF. Requires connection of a current indicator.

Current Vector

FLOW FROM FLOW TO

Figure 5-9 Current vector

5-10