RES. COLOR: Sets transfer characteristics of input signal level versus display echo level. Echo strength is emphasized in order of CUBE, SQUARE, LINEAR, LOG. You can see the characteristics of each by watching the color bar as you change the setting. The default setting is LOG.

LOG:

Displays weak to strong echoes in their respective levels. This setting is suitable for

 

general use.

LINEAR:

Downplays the weak echoes when compared with LOG. Effective for suppressing

 

weak echoes such as plankton.

SQUARE: Strong echoes are emphasized more than in LINEAR.

CUBE:

Strong echoes are emphasized even more than in SQUARE.

CLUTTER: Low intensity echoes, often caused by sediments in water, are painted on the screen as a large number of random dots. The higher the number (setting) the weaker the echoes which are erased.

A-SCOPE:Turns the A-scope display on/off. Default setting is OFF. See paragraph 4.10.2 on page 4-9.

4-11

Page 79
Image 79
Furuno CH-250 manual General use