Furuno CH-250 manual SYS Menu, System Setting

5.4SYS Menu

This menu provides items which may be set according to operator’s preference. A demonstration mode is provided to acquaint you with the many functions of this equipment, and it may be used without connection of the transducer.

1.Press the [MENU] key to open the menu.

2.Press to select MENU, and then press to select SYS.

3.Press to select GO TO SYS MENU.

4.Press to select YES.

** SYSTEM MENU **

SYSTEM SETTING:

RANGE-SONAR MODE

RANGE-VERTICAL MODE

RANGE-E/S MODE

RANGE-TRACK MODE

COLOR PALETTE

LANGUAGE

SYSTEM BACKUP

LOAD BACKUP DATA

HEADING OFFSET, DRAFT OFFSET

ADJ MOTION SENSOR

TX FREQ ADJUST

TEST

TEST PATTERN

DEMO MODE

DEFAULT

: SELECT : MENU DISPLAY MENU: END

Adjusted at installation. See installation manual

See Chapter 6.

Figure 5-7 System menu

5.Press or to select item desired.

6.Press or to open corresponding dialog box.

7.Press or to select option.

8.Press the [MENU] key twice to register your selection and close the menu.

5-9