RON/OFF button (page 18)SLIVE SAMPLER (UTILITY, WAKE UP) buttons (page 17, page 27)TSYNC MASTER/MIDI button (page 19)UMIX button (page 15)VREMIX button (page 16)WON/OFF button (TOUCH PANEL EFFECT) (page 15)XCrossfader (page 12)YMASTER control (page 12)ZMaster Level Indicator (page 12)ABALANCE control (page 14)BMONO, STEREO selector switch (page 14)CBOOTH MONITOR control (page 14)DSTART/STOP (SNAPSHOT) button (page 19)EON/OFF (MIDI) button (page 19)FCH EQ (ISOLATOR, EQ) selector switch (page 12)GCH FADER (, ) selector switch (page 13)HCROSS FADER (, ,) selector switch (page 13)

Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit.

Basic OperationOutputting sound1 Press [POWER] button.

Turn on the power of this unit.

2Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch

Selects the input sources for the different channels from among the devices connected to this unit.

—[CD/DIGITAL]: Selects the DJ player connected to the [CD] termi- nals. To select the DJ player connected to the [DIGITAL IN] termi- nal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL].

—[PHONO]: Selects the analog player connected to the [PHONO] terminals.

—[LINE]: Selects the cassette deck or CD player connected to the [LINE] terminals.

—[USB */*]: Selects the sound of the computer connected to the [USB] port.

3 Turn the [TRIM] control.

Adjusts the level of audio signals input in each channel.

The corresponding channel level indicator lights when audio signals are being properly input to that channel.

4 Move the channel fader away from you.

Adjusts the level of audio signals output in each channel.

5Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch.

Switches the output destination of each channel.

—[A]: Assigns to [A] (left) of the crossfader.

—[B]: Assigns to [B] (right) of the crossfader.

—[THRU]: Selects this when you do not want to use the crossfader. (The signals do not pass through the crossfader.)

6 Set the crossfader.

This operation is not necessary when the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU].

7 Turn the [MASTER] control.

Audio signals are output from the [MASTER1] and [MASTER2] terminals.

The master level indicator lights.

Adjusting the sound qualityTurn the [EQ/ISO (HI, MID, LOW)] controls for the respective channels.

Refer to Specifications on page 31 for the range of sound that can be adjusted by each control.

Switching the function of the [EQ/ISO (HI, MID, LOW)] controlsSwitch the [CH EQ (ISOLATOR, EQ)] selector switch.

—[ISOLATOR]: The isolator function is set. The indicator lights.

—[EQ]: The equalizer function is set.

Monitoring sound with headphones1Connect headphones to the [PHONES] terminal.2Press the [CUE] button(s) for the channel(s) you want to monitor.

12En