Pioneer DJM-2000nexus, DJM-2000NXS 1 Press [REMIX], 4 Press the roll pad, 1 Press [REMIX] twice, 3 Press [EFFECT] and select [SAMPLER], 2 Press the [2] button in the [CH] section

The changed order and timing can be played repeatedly in units of the length of the sampled sound (4 or 8 beats).

	1	2	3		4	7
								8
					5	9
							a
							b
					6
1	Channel select			Used to select the channel to which the sound you
	menu			want to sample is being input.
2	SETTING			Displays the settings screen at which various settings
				are made.
3	SEQ REC			Records the order and time at which the roll pad is
				pressed.
4	MUTE			Inserts a silent section in the rolled sound.
5	ROLL PAD			Rolls the sampled sound that has been sliced into 8
				equal parts for the specified length.
				Displays the waveform of the sampled sound. Playback
6	Sequence control			can be started from the sound of that waveform by
				touching the waveform (cue).
7	EXIT			Exits this screen, returning to the BEAT SLICE REMIX
				screen.
				Selects the output channel for the beat slice remix
				function.
8	OUTPUT CH select			! SAME: Sets the input channel to the output
					channel.
				!	CH1 – 4: Sets the selected channel as the output
					channel.
	SEQUENCE			Selects the length for sampling the sound.
9				! 4BEAT: Samples 4 beats of sound.
	LENGTH select			!	8BEAT: Samples 8 beats of sound.

Selects the beat information to serve as the basis for the operation.

		!	CHANNEL: Selects the audio input channel’s beat
A	SYNC SOURCE		information as the basis.
		!	SYNC MASTER: Selects the master BPM’s beat
			information as the basis.
		!	MANUAL: Selects the BPM and beat position set
			at the BPM setting as the basis.

When [MANUAL] is selected at SYNC SOURCE, specify the BPM and beat position to serve as the basis here.

!	a/b: Increases or decreases the BPM value.
!	BPM display: Displays the BPM value to serve as
B BPM setting	the basis for the operation. If the beat information
	cannot be obtained, the display flashes.
!	TAP: When this button is tapped 2 or more times,
	the interval at which it was tapped is calculated
	and displayed in the BPM display area as the BPM
	value.

1 Press [REMIX].

The [BEAT SLICE REMIX] screen appears on the touch panel.

!The function switches between [BEAT SLICE REMIX] and

[SIDECHAIN REMIX] each time the [REMIX] button is pressed.

2 Press one of the buttons on the channel select menu.

Select the input channel.

3 Press the [ON/ OFF] button (TOUCH PANEL EFFECT).

Sampling of the sound starts.

Once the sound is sampled for the number of beats specified at [SEQUENCE LENGTH], rolling of that sound starts.

!The sampled sound is sliced into equal parts based on the beat posi- tion information obtained by PRO DJ LINK or the beat time calcu- lated from the BPM value and the parts are assigned to the roll pad for the respective beat lengths to be played.

16En

4 Press the roll pad.

The assigned sound is played.

If the roll pad is pressed and held for a time longer than the assigned sound, the assigned sound is played repeatedly.

SIDECHAIN REMIX

When this function is used, the sound of the specified frequency band for the specified channel can be used as the trigger to apply effects to the sounds of other channels.

15

	6	9
2
3	7
4		a
	8

1	CH	This selects the channel to which the effect is applied.
2	HOLD	This holds the effect’s parameter information (the posi-
		tion at which the control area was touched).
3	EFFECT	This selects the type of effect.
4	LEVEL/DEPTH	Use this to adjust the amount of the effect applied.
5	EXIT	Use this to close the [TRIGGER] menu.
	TRIGGER
6	(SAMPLING/	Use this to open the [TRIGGER] menu.
	TRIGGER)
7	TRIGGER BAND	Use these to select the frequency band to be used as
		the trigger.
8	Control area	Use this to change the effect’s parameters.
	TRIGGER CH	This selects the channel to be used as the effect
9	(SAMPLING/
		trigger.
	TRIGGER CH)
A	Trigger indicators	These flash according to the automatically detected
		rhythm for the different frequency bands.

To set the channel for sampling and triggering to [CH3] and mix the sampled sound with the sound of [CH2] for output:

Prepare this unit in advance so that the sound of [CH2] is being output from the [MASTER] terminals.

1 Press [REMIX] twice.

The [SIDECHAIN REMIX] screen appears on the touch panel.

2 Press the [2] button in the [CH] section.

This selects the channel to which the effect is applied.

3 Press [EFFECT] and select [SAMPLER].

This selects the type of effect.

Effect Name	Descriptions
NOISE	Sound is created inside this unit, mixed to the sound
HI-HAT	of the channel selected in the [CH] section, then
CLAP	output according to the [TRIGGER CH (SAMPLING/
SNARE	TRIGGER CH)] trigger.
	The sound of the channel selected at [TRIGGER CH
	(SAMPLING/TRIGGER CH)] is sampled, mixed to
SAMPLER	the sound of the channel selected in the [CH] sec-
	tion, then output according to the [TRIGGER CH
	(SAMPLING/TRIGGER CH)] trigger.
	The pitch of the sound of the channel selected in
	the [CH] section is changed, mixed with the channel
PITCH	selected in the [CH] section, then output according
	to the [TRIGGER CH (SAMPLING/TRIGGER CH)]
	trigger.
GATE	The sound input at [CH] is output according to the
	[TRIGGER CH (SAMPLING/TRIGGER CH)] trigger.

!It is not possible to select multiple effects simultaneously.