Pioneer DJM-2000nexus, DJM-2000NXS Changing the settings, Setting preferences, About the auto standby function, seconds, 1seconds, 5 Press [EXIT], 3 Select the setup item

Changing the settings

1

1Setup item button

English

1Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least

1seconds.

The [USER SETUP] mode setting screen is displayed.

The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes.

!To display the [CLUB SETUP] screen, first turn this unit’s power off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY, WAKE UP)].

2 Press the setup item button.

The selection items appear.

3 Select the setup item.

Select the item on the touch panel and enter it.

4 Change the item’s setting.

Select the item on the touch panel and enter it.

!Press [SAVE] to save the changes to the [CLUB SETUP] screen.

5 Press [EXIT].

Close the [USER SETUP] mode setting screen.

!To close the [CLUB SETUP] mode setting screen, press the [POWER] button to turn this unit’s power off.

Setting preferences

Settings indicated in italics are the default settings set upon purchase.
Mode	Options settings	Selection item 1	Selection item 2		Selection item 3	Descriptions
			BUTTON ACTION		TOGGLE	Select the MIDI signal sending method, [TOGGLE]
		ZONE11			TRIGGER	or [TRIGGER].
			MIDI CHANNEL		1, 2, to 16	Sets the MIDI channel.
			BUTTON ACTION		TOGGLE	Select the MIDI signal sending method, [TOGGLE]
	MIDI				TRIGGER	or [TRIGGER].
		ZONE22	MIDI CHANNEL		1, 2, to 16	Sets the MIDI channel.
						Restores the [TYPE A] – [TYPE D] MIDI settings
			RESET		—	to the default values. [RESET] function is unique
USER SETUP						to [ZONE2].
		LINK	CH1 to CH4		ON, OFF	Turns the fader start function on and off for all DJ
						players connected to the [LINK] terminals.
	FADER START
		CONTROL	CH2, CH3		ON, OFF	Turns the fader start function of the DJ players
						connected to the [CONTROL] terminals on and off.
	LCD	BACK LIGHT	1, 2, 3, 4, 5		—	Adjusts the touch panel’s brightness.
	VERSION No.	—	—		—	Displays this unit’s software version.
	QUANTIZE	QUANTIZE	ON, OFF		—	Turns use of the beat information obtained from
						the player on and off.
		DIGITAL OUT MAX LEVEL	–19 dB, –15 dB,	–10 dB, –5 dB	—	Sets the maximum level of the sound output from
	SYSTEM					the [DIGITAL OUT] terminals. 1
		DIGITAL SAMPLING RATE	48 kHz, 96 kHz		—	Sets the digital signal’s sampling rate.
		AUTO STANDBY	ON, OFF		—	Turns the auto standby function on and off.
		OUTPUT TO BOOTH	ON, OFF		—	Sets whether or not to output the microphone’s
		MONITOR				audio signals from [BOOTH] terminals.
		TALK OVER THRESHOLD	–25 dB, –20 dB,	–15 dB,		Sets the talkover sensitivity. The talkover function
					—	is activated when a sound with a volume above the
	MIC	LEVEL	–10 dB
CLUB SETUP						set volume is input to the microphone.
			–25 dB, –20 dB,	–15 dB,		Sets the attenuation level for the sound other than
		TALK OVER LEVEL			—	the microphone’s sound when the talkover func-
			–10 dB
						tion is activated.
	TOUCH PANEL	—	—		—	The touch panel’s calibration is adjusted by press-
						ing [+] in order.
	PEAK LIMITER	PEAK LIMITER	ON, OFF		—	Alleviates sudden, unpleasant digital clipping of
						the master output.
	FACTORY RESET	YES, NO	—		—	Restores all the settings to their factory defaults.

1Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX].

2Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen.

About the auto standby function

When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met.

—That none of this unit’s buttons or controls are operated.

—That no audio signals of –10 dB or greater are input to this unit’s input terminals.

—That no PRO DJ LINK connections are made.

!The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed.

En 27