1Insert the included CD-ROM into the computer’s CD drive.

The CD-ROM folder appears.

!Double-click the CD icon on the desktop when folders are not dis- played after a CD-ROM has been loaded.

2 Double-click [DJM-2000_M_X.X.X.dmg].

The [DJM-2000AudioDriver] menu screen appears.

3 Double-click [DJM-2000AudioDriver.pkg].

The driver installation screen appears.

4Check the details on the screen and click [Continue Anyway].

5When the Software Use Agreement screen appears, select [English], carefully read the Software end user license agreement and click [Continue Anyway].

You can select one from multiple languages depending on the system environment of your computer.

6If you consent to the provisions of the Software end user license agreement, click [Agree].

If you do not consent to the provisions of the Software end user license agreement, click [I disagree] and stop installation.

7Proceed with installation according to the instructions on the screen.

!Click [Cancel] to cancel installation after it has started.

!When the installation of the driver software is completed, you need to reboot your computer.

Connecting this unit and computer1 Connect this unit to your computer via a USB cable.

This unit functions as an audio device conforming to the ASIO standards.

!When using ASIO-compatible applications, [USB 1/2], [USB 3/4], [USB 5/6] and [USB 7/8] can be used as inputs. Depending on the input/output setting, it is possible to use three of this unit’s sets of inputs.

!When using DirectX-compatible applications, only [USB 1/2] can be used as the input.

!The computer’s recommended operating environment depends on the DJ application. Be sure to check the recommended operating environment for the DJ application you are using.

!When another USB audio device is connected to the computer at the same time, it may not operate or be recognized normally.

We recommend only connecting the computer and this unit.

!When connecting the computer and this unit, we recommend con- necting directly to this unit’s USB port.

2 Press [POWER] button.

Turn on the power of this unit.

!The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears.

!When installing on Windows XP

—[Can Windows connect to Windows Update to search for software?] may appear while the installation is in progress. Select [No, not this time], then click [Next] to continue installation.

—[What do you want the wizard to do?] may appear while the installation is in progress. Select [Install the software automatically (Recommended)], then click [Next] to continue installation.

—If [Windows Security] appears on the screen while the installa- tion is in progress, click [Install this driver software anyway] and continue with the installation.

10En

Switching the input/output setting

Use this procedure to switch the computer’s input/output setting when using the driver software.

!If applications using this unit as the default audio device (DJ applica- tions, etc.) are running, quit those applications before switching the input/output setting.

!Some time is required after the input/output setting is switched for the computer to be updated. The input/output setting cannot be switched while the computer is being updated.

!Sound may not be output if there are differences between the input/ output settings on this unit and on the computer. If this happens, turn this unit’s power on and reset the input/output settings with the USB cable connected.

!If the input/output setting is switched while using DirectX, the appli- cation may not recognize the driver software.

!MIDI communications are interrupted if the input/output setting is switched during MIDI communications.

Switching procedure (Windows)

Click the Windows [Start] menu>[All Programs]>[Pioneer]>[DJM-2000]>[DJM-2000 Setting Utility].

Switch the computer’s input/output setting.

—ASIO 4 outputs 0 inputs 16 bits DirectX 1 output 0 inputs

—ASIO 3 outputs 1 input 16 bits DirectX 1 output 1 input

—ASIO 3 outputs 0 inputs 24 bits DirectX 1 output 0 inputs

Switching procedure (Macintosh)Click [Apple]>[System Preferences]>[Other]>[DJM-2000 Settings].

Switch the computer’s input/output setting.

—8-channel output No input 16 bits

—6-channel output 2-channel input 16 bits

—6-channel output No input 24 bits

Adjusting the buffer size (Windows)

Use this procedure to adjust the computer’s buffer size when using ASIO driver software.

Click the Windows [Start] menu>[All Programs]>[Pioneer]>[DJM-2000]>[DJM-2000 Setting Utility].

If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases.

!If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size.

Checking the version of the driver softwareProcedure for checking (Windows)

Click the Windows [Start] menu>[All Programs]>[Pioneer]>[DJM-2000]>[DJM-2000 Version Display Utility].

The [Version] screen appears.

Procedure for checking (Macintosh)Click [Apple]>[About This Mac]>[MoreInfo]>[Extensions]>[DJM-2000 USBAudio].

The [Version] screen appears.

Checking the latest information on the driver software

For the latest information on the driver software for exclusive use with this unit, visit our website shown below. http://pioneerdj.com/support/